Trumpf LASERCELL 1005, Operator'S Manual

Page: 519 / 645

B337EN06.doc
Machine maintenance
6-3
1. General guidelines
Correct maintenance is a prerequisite for maintaining the quality of
the machine. This avoids operational errors and their conse-
quences.
Danger
Risk of fatal injury during maintenance work when the
machine is switched on!
½
When not expressly instructed otherwise:
-
Switch off the MAIN SWITCH.
-
Lock the MAIN SWITCH.
-
Remove the key.
½
Keep strictly to the safety rules.
Notes on cleaning
1. The entire system should be cleaned at regular intervals.
2.
Brush off larger dirty parts or vacuum with an industrial vacuum
cleaner.
Notes on lubrication
When lubricating the machine, refer to the lubrication chart and the
maintenance instructions. In addition, the following points should be
noted:
•
Do not leave filler and drainage caps open for longer than
necessary and keep them clean at all times.
•
Only drain waste oil at operating temperature.
•
Use only lint-free cleaning cloths and a low viscosity spindle oil
to clean oil chambers and lubricating points. Grease-removing
cleaning agents must not be used.
•
Do not mix synthetic lubricating oils with mineral oils or
synthetic oils from other manufacturers, even if the synthetic oil
has equivalent properties.
•
Dispose of waste oils properly.