Trumpf LASERCELL 1005, Operator'S Manual

Page: 241 / 645

B337EN4_3
Operation
4-81
Fig. 39426en
Piercing
•
Piercing time: time in seconds after which the execution of the
ramp cycle will be aborted; valid for editing with and without
SprintLas.
•
Ramp cycle number: number of the ramp cycle which is
executed when piercing the material.
•
Nozzle distance: distance between the lower edge of the
nozzle and the material surface in mm.
•
Blow-out time: this function is not available in the current
software version.
•
Gas type:
-
0 = no gas.
-
1 = oxygen (O
2
).
-
2 = nitrogen (N
2
).
-
3 = laser gas (customized).
•
Gas pressure: programmed gas pressure in bar with which the
cutting gas is emitted during piercing.