Trumpf LASERCELL 1005, Operator'S Manual

Page: 324 / 645

4-164
Operation
B337EN4_10.DOC
10.3 MDC Displaying and editing machine
data
You can have all recorded interruptions of the machine runtime
displayed and issued as a file in the "Edit machine data" function
area. Beyond this, you can assign a cause (MDC message text) to
each interruption here, as well as subdivide the interruptions into
periods of time.
You can access the "Edit machine data" function area via the
1 Activity – 7
MDC – 2 Data menu item from the menu bar of the
user interface.
Fig. 31273EN
You can see a list in the mask of all the messages of the machine
control system (PLC message) recorded within a period of time
defined by the user. The following information is displayed for each
message:
Displaying and editing
machine data
•
Date: the date and exact time of the message.
•
Seq: If there are two or more messages with the same date,
the order in which they were registered is displayed.
•
Status: Only two machine statuses are registered:
-
Stationary: The machine has stopped for some reason.
-
Running: The machine has been put back into operation.
•
Interrupt: the number of the message text. The "Stationary"
message of the machine control system has been assigned, as
a default, the number 207.
•
Info: the MDC message text.