Trumpf LASERCELL 1005, Operator'S Manual

Page: 347 / 645

B337EN4_8
Operation
4-187
Continue
Press Continue.
The "TLC zero point memories G54 G55 G56 G57" mask is
displayed while the control system loads the current actual
positions of the axes and the axis positions defined in the zero point
memory.
The "TLC zero point memory initial screen" mask is then opened.
The current axis positions are displayed in the "Actual position ..."
field. The axis positions currently set in the zero point memory are
displayed in the "Defined position" field.
Fig. 36068en
Select the G54, G55, G56, or G57 zero point memory.
All axes
Press All axes.
The "TLC zero point memory, all axes" mask is opened.
Set all
Press Set all.
The current axis positions in the "Actual position ..." field are
entered in the "Default position" field.
Back
Press Back.
Note: the axis positions entered in the "Default position" field can be
edited manually at any time.
Adopt
Press Adopt.
The axis positions entered in the "Default position" field are
transferred to the selected zero point memory: the "Default position"
becomes "Defined position"” and thus takes effect in the NCU. The
"TLC zero point memories G54 G55 G56 G57" mask is displayed
during transmission to the zero point memory. The defined
positions are displayed in the "TLC zero point memory initial
screen" mask once the transmission is finished.