Trumpf LASERCELL 1005, Operator'S Manual

Page: 415 / 645

5-2
Safety information
B337EN05.DOC
5.4 Determining and setting the focus position .................... 5-25
Adjusting the setting on the cutting head.................. 5-29
Determining focus position f=0 ................................. 5-30
Correcting focus position .......................................... 5-32
6. Adjustment work on the welding head ...................... 5-33
6.1 Installing the welding head............................................. 5-33
6.2 Centering the beam........................................................ 5-34
6.3 Determining and setting the focus position .................... 5-37
Utility program CP_FOCUS_WELD.......................... 5-38
Setting the welding head to the nominal
dimension.................................................................. 5-40
Focus search with machines without AutoLas
Plus ........................................................................... 5-41
Focus search with machines with AutoLas Plus...... 5-47
7. Determining the joint offset ........................................ 5-65
7.1 Determine link offset of X and Y axis ............................. 5-67
Determining the joint offset for cutting head ............. 5-67
Determining the joint offset for the welding
head .......................................................................... 5-69
7.2 Determining link offset of Z axis (tool length)................ 5-71
8. Changing the gas and air connections at the Z
center sleeve ................................................................ 5-74
9. Recording the DIAS characteristic curve .................. 5-75
10. Checking and setting the Crossjet............................. 5-76
11. Setting the flow rate of the welding gas .................... 5-77
12. Switching over the welding gas ................................. 5-78
13. Measuring probe (optional)......................................... 5-79
13.1 Installing the measuring probe ....................................... 5-79
Selecting measuring probe ....................................... 5-80
Calibrating the measuring probe............................... 5-83
14. Welding wire feed (optional) ....................................... 5-86
14.1 Inserting welding wire..................................................... 5-86