Trumpf LASERCELL 1005, Operator'S Manual

Page: 178 / 645

4-18
Operation
B337ENE4_1
Control elements on the start post of the pallet changer Fig. 27516
The pallets can be moved manually into loading position (button 3)
or into work position (button 4). The pallet keeps moving as long as
the button is pressed down. This kind of operation is referred to as
dead man mode. The pallet stops automatically when it reaches the
final position. The pallets travel in work position towards a fixed
stop. They are not indexed in work position.
Danger
of persons being struck or crushed in the area of the travelling
tables
½
Before pressing a button to set a machine table in motion, the
operator must ensure that no persons are within the travel
range of the pallet.
1 3 4
8
2 5 6
7
9
10
1 RESET 5 LIGHT BARRIER
2 CLAMP (customized) INTERRUPTED
3 MOVE PALLET INTO LOADING 6 FEED HOLD
POSITION 7 START
4 MOVE PALLET INTO WORK 8 ACKNOWLEDGE LOADING
POSITION 9 E-STOP
10 NC axis (pallet) designation