Trumpf LASERCELL 1005, Operator'S Manual

Page: 459 / 645

5-46
Adjustment work on the welding head
B337EN05.DOC
A weld seam 450 mm in length is welded in order to test whether
the focus point remains constant over longer stretches.
Prerequisite
•
Focus position of f=0 is determined.
•
Length of the welding nozzle is corrected.
•
Nozzle distance 15 mm.
1. Select the program CP_FOCUS_WELD.
2. Press Select program.
A dialog box is opened.
"Focus search for welding heads" mask
3. Select Results check.
4. Press Continue.
5. Press Prepare.
The program is aborted.
Note
Pan the sheet or select a new starting position or use a new
sheet. Do not change the nozzle distance!
6. Press START.
The program is started at the current position. A 450 mm long
weld seam is welded.
7. Check weld root.
If the weld root is constant across the entire weld seam length,
then the focus search is ended.
Starting results check
Fig. 38779en