Trumpf LASERCELL 1005, Operator'S Manual

Page: 205 / 645

B337EN4_3
Operation
4-45
Fig. 36342en
TLF laser status
•
Laser power: current laser output in watts
•
System pressure: current gas pressure in resonator in hPa
•
Resonator status:
−
Start-up: after the laser is switched on with the Laser
ON/OFF button, the automatic power-up cycle will start and
the resonator status "Start-up" will be displayed.
−
Operating: once the power-up cycle has been completed,
the resonator is at the working pressure and the nominal
RPM of the radial turbine blower is reached. The laser is
ready for operation.
−
Run down: after the laser is switched off with the Laser
ON/OFF button, the automatic shutdown cycle will start and
the resonator status "Run down" will be displayed.
−
At rest: once the shutdown cycle has been completed, the
resonator will have the system pressure 1100 hPa. The
control system can be switched off.
−
Leakage test: this resonator status is displayed if the
leakage test has been started via "DIAGNOSTICS - Laser -
Leakage test".
−
Switch elements: this resonator status is displayed if the
switch elements for TLF laser intervention 1 or 2 have been
activated. In this case, the laser can then only be operated
by means of the switch elements. The laser status resulting
from operating the switch elements is reset to its initial
status as soon as the switch elements are deactivated
again.