Trumpf LASERCELL 1005, Operator'S Manual

Page: 354 / 645

4-194
Operation
B337EN4_8
Select the G54, G55, G56, or G57 zero point memory.
Individual
axes
Press Individual axes.
The "TLC zero point memory, individual axes" mask is opened.
Select ....
If needed: press Select round.
Note: the Select ... softkey can be used to switch to and fro
between linear and rotational axes.
Select an axis or axis combination.
Delete
...
Press Delete ....
Note: only the display is changed. The values in the zero point
memory have not yet been deleted.
Example: Linear axes selection Fig. 36069en
Back
Press Back.
Adopt
Press Adopt.
The axis positions entered in the "Defined position" field are set to
0 for the selected axes. The "TLC zero point memory initial screen"
mask is displayed once transmission is finished.
Exit
Abort
Press Exit Abort.
The process is over. The dialog box is closed.
Note: the dialog is aborted if this softkey is pressed before the
Adopt softkey is pressed. The "defined position" in the zero point
memory remains intact.