Trumpf LASERCELL 1005, Operator'S Manual

Page: 443 / 645

5-30
Cutting head setting work
B337EN05.DOC
Determining focus position f=0
The program cuts a reference part out of the sheet with slats of
equal size. The individual slats are cut consecutively, each with a
different focus position, resulting in the kerf between the slats
being changed continuously. The numerical value engraved for
each gap defines the adjustment value by which the fixed setting
value (-3 mm or -5 mm) has to be corrected on the focus
adjustment screw. The actual focus position f = 0 corresponds to
the position with the smallest kerf.
The CP_FOCUS_CUT.LST program is used to determine the
adjustment value. The CP_FOCUS_CUT program has an online
help.
-2,0
-1,8
-1,6
-1,4
-1,2
-1,0
-0,8
-0,6
-0,4
-0,2
0,0
+2,0
+1,8
+1,6
+1,4
+1,2
+1,0
+0,8
+0,6
+0,4
+0,2
f=0
c
a
. 110
+X -X
-Y
+Y
ca. 40
S
1 Start position
Reference part Fig. 31261