Trumpf LASERCELL 1005, Operator'S Manual

Page: 237 / 645

B337EN4_3
Operation
4-77
Fig. 39421en
Note
With software version V5.xx, the standard value for X, Y and Z axis
acceleration has been changed from the previous 2 m/s
2
to 4 m/s
2
now. The maximum acceleration, previously limited to 3 m/s
2
, is
now 5 m/s
2
.
7
Applies to machines without AutoLas Plus. This parameter is not required for machines with AutoLas Plus.
General cutting
•
Manual setting dimension
7
: setting dimension in mm. States
the position of the focus relative to the nozzle tip. This value
has to be set manually at the cutting head.
•
Acceleration: acceleration of the X, Y, and Z axes in m/s² until
the axes have reached the programmed cutting speed (max.
5 m/s
2
).
•
Gas type:
-
0 = no gas.
-
1 = oxygen (O
2
).
-
2 = nitrogen (N
2
).
-
3 = laser gas (customized).
•
Speed reduc. thick sheet: value in % by which the cutting
speed is to be reduced for approaching thick sheets.