Trumpf LASERCELL 1005, Operator'S Manual

Page: 180 / 645

4-20
Operation
B337ENE4_1
Control element Prerequisites Explanation
Start
None Pressing this button acknowledges
FEED HOLD. Any machining program
interrupted is resumed.
ACKNOWLEDGE
LOADING
Automatic program is active.
A summary production plan is being
executed.
The device must be clamped if the
CLAMP button has been allocated.
Button may not light up or flash.
Pressing this button acknowledges the
loading of the pallet. The pallet travels
into the working area.
Button is lit up as long as the pallet is in
loading position and loading has not yet
been acknowledged.
MOVE PALLET
INTO LOADING
POSITION
SETUP activity has been selected.
The machining head must be above an
applied height.
E-STOP is not active.
The door must be completely open.
Separated pallets have to be coupled
mechanically if they are to be moved
into the working area together.
Pressing this button moves the pallet
manually into loading position.
The pallet keeps moving as long as the
button is pressed down. The pallet is
stopped automatically once the final
position has been reached.
Button flashes while the pallet is in
motion.
Button lights up as soon as the final
position has been reached.
MOVE PALLET
INTO WORK
POSITION
SETUP activity has been selected.
The machining head must be above an
applied height.
E-STOP is not active
The door must be completely open.
Separated pallets have to be coupled
mechanically if they are to be moved
into the working area together.
Pressing this button moves the pallet
manually into work position.
The pallet keeps moving as long as the
button is pressed down. The pallet is
stopped automatically once the final
position has been reached.
Button flashes while the pallet is in
motion.
Button lights up as soon as the final
position has been reached.
ACKNOWLEDGE
LIGHT GRID
None The light barrier is acknowledged by
pressing the foot switch.
The light barrier only has to be
acknowledged once if there are two
start posts per pallet changer.