Trumpf LASERCELL 1005, Operator'S Manual

Page: 405 / 645

B337EN4_8
Operation
4-245
21. Evaluating the ODC interface
The Operating Data Collection (referred to as ODC in the following)
allows the user to keep a log of the following operation and
machine data during machining:
Each ODC is tied to an NC program. Cycles which collect and
record the operation data must be programmed in the respective
NC programs in order to be able to evaluate the operational data.
Note Cycles for ODC: see programming guide for TLC 1000,
TLC 1005, TLC 6005.
21.1 Opening a LOG-file
The operation data is saved monthly in a LOG file. A data record is
created for each workpiece. Up to 25 000 data records can be
stored per file. The file name is made up of the year and month,
e.g. "2002-05.LOG".
The LOG file is saved to the hard disk of the PCU 50 in the
C:\DH\TOPSMANU.DIR\LOG directory. The LOG file can be
loaded via a network connection or diskette at any PC. The LOG
file can be opened by any text editor.
3
Applies to two station operation.
•
Date
•
Time
•
Main program name.
•
Reference text.
•
Machining station.
-
0 = entire working area.
-
1 = Machining station 1 (left).
3
-
2 = Machining station 2 (right).
1
•
Machining time.
•
Laser operating time.
•
Downtime due to FEED HOLD.