Trumpf LASERCELL 1005, Operator'S Manual

Page: 185 / 645

B337EN4_1
Operation
4-25
Control element Prerequisites Explanation
RESET
None Pressing this button:
Control system operations are inter-
rupted and the control system is reset
to its switch-on condition. Deletes all
active error messages
Stops and ends an active program
The reference points are retained.
ESTABLISH
HOME POSITION
MACHINE ON
FEED HOLD is not active.
E-STOP is not active.
Pressing this button:
The axes are referenced and the home
position of the machine is established.
Button flashes as long as the home
position has not yet been established.
Button lights up as soon as the home
position has been reached.
The illuminated button starts to flash if
it is pressed again. The button must be
pressed every time the home position
is to be established.
START
None Pressing this button acknowledges
FEED HOLD. Any machining program
interrupted is resumed.
LASER
LASER ON/OFF
None The automatic power-up cycle of the
laser is started by pressing the button.
Button flashes as long as the power-up
cycle has not been completed.
Button lights up as soon as the laser is
ready for operation.
The automatic shutdown cycle starts if
the illuminated button is pressed again.
Button flashes as long as the shutdown
cycle has not been completed. The
light in the button goes out if the laser
is no longer ready for operation.