Trumpf LASERCELL 1005, Operator'S Manual

Page: 407 / 645

B337EN4_8
Operation
4-247
22. Carrying out a back up of the PCU 50
A backup of the PCU 50 hard drive needs to be performed at
certain intervals. With this data backup, TRUMPF Service can
restore the PCU 50, either on-site or by remote diagnostics, in the
event of data loss, e.g. resulting from a power failure or software
error. Under no circumstances should the user reload the
stored data back onto the PCU 50 on his own. Machine data
which have been changed in the meantime could be overwritten.
Prerequisite
The control system starts up.
When the following image appears:
Fig. 36628
•
Control system is completely functioning.
•
ZIP drive and 2 empty ZIP disks with 250 MB memory capacity
each.
•
MAIN SWITCH is switched off.
1. Connect ZIP drive to the parallel interface at the control panel.
Insert empty ZIP disk.
2. Switch on the MAIN SWITCH. Go at once to the control panel.
3. With the <Cursor>, select TRUMPF Service Menu, confirm with
<Enter>.