Trumpf LASERCELL 1005, Operator'S Manual

Page: 352 / 645

4-192
Operation
B337EN4_8
Select the G54, G55, G56, or G57 zero point memory.
All axes
Press All axes.
The "TLC zero point memory, all axes" mask is opened.
Delete all
Press Delete all.
The display in the "Defined position" field changes. All axis
positions are set to 0.
Note: only the display is changed. The values in the zero point
memory have not yet been deleted.
Fig. 36070en
Back
Press Back.
Adopt
Press Adopt.
The axis positions entered in the "Defined position" field are set to
0 for all axes. The "TLC zero point memory initial screen" mask is
displayed once transmission is finished.
Exit
Abort
Press Exit Abort.
The process is over. The dialog box is closed.
Note: the dialog is aborted if this softkey is pressed before the
Adopt softkey is pressed. The "defined position" in the zero point
memory remains intact.