Trumpf LASERCELL 1005, Operator'S Manual

Page: 187 / 645

B337EN4_1
Operation
4-27
Control element Prerequisites Explanation
POTENTIOMETER
CUTTING GAS
PRESSURE
None With the potentiometer, the cutting gas
pressure is changed by around
±
20 %.
FEED
POTENTIOMETER
None The potentiometer is used to regulate
the speed of the axes within a range of
0-120 %.
JOG mode:
Feedrate 0-15 m/min.
Automatic mode:
Feedrate with simultaneous axis motion
0-85 m/min.
Screen display of the respective travel
speed in percent and in m/min.
E-STOP
None Pressing the impact button:
Stops all path movements of the
machine, pallet changer, and any other
available devices.
The cutting gas and/or the cutting gas
supply is interrupted.
Closes the beam trap and switches off
the laser beam.
Immediately cuts off the power supply
of the entire machine (except the 24 V
control voltage).
Aborts an active machining program,
which has to be restarted as
necessary.