Trumpf LASERCELL 1005, Operator'S Manual

Page: 389 / 645

B337EN4_8
Operation
4-229
16.2 Uploading an NC program from
the hard disk
An NC program is stored as master file on the hard disk in the
directory C:\DH\TOPSMANU.DIR and is to be split up and
transferred to the program manager of the control system in order
to be executed at the machine.
N10
N20
Select the "PROGRAMMING - File management" activity field.
Select the drive column using the FOCUS key.
Select the "C:\DH\TOPSMANU.DIR" drive using the CURSOR keys.
Actuate ENTER.
The contents of the hard disk drive are read and displayed.
Select the desired program with the CURSOR keys.
Split master
file
Press the Split master file softkey
The master file is split up into main programs, subroutines and table
entries and stored in the program manager of the control system.