Trumpf LASERCELL 1005, Operator'S Manual

Page: 284 / 645

4-124
Operation
B337EN4_4
•
Right index active: actuate this switch element if you want to
index the table in machining station 2 or undo the indexing.
-
Not applied. This switch element does not work if two-
station operation is deactivated (partition panel removed)
and for machines without two-station operation.
-
Inactive: set this switch element to inactive if you want to
undo the indexing.
-
Active: set this switch element to active if you want to index
the table/tables.
-
Disabled: during active teach mode or the execution of a
program.
•
Indexing status left: Status display.
-
Index released
-
2-way index: both indexing bolts in the left indexing range
are indexed.
-
1-way index: only the outer index bolt in the left-hand
indexing range is indexed.
-
In motion.
-
Delay time.
•
Status indexing on the right: Status display.
-
Index released.
-
2-way index: both indexing bolts in the right-hand indexing
range are indexed.
-
1-way index: only the outer index bolt in the right-hand
indexing range is indexed.
-
In motion.
-
Delay time.