Toshiba Q9 Plus ASD, Installation & Operation Manual

Page: 211 / 434

E6581611
F-31
6
6.7 Terminal function selection
6.7.1 Keeping an input terminal function always active (ON)
f104
: Always active function selection 1
f108
: Always active function selection 2
f110 : Always active function selection 3

Function
This parameter specifies an input terminal function that is always to be kept active (ON).
[Parameter setting]
Title Function Adjustment range Default setting
f104 
Always active function selection 1 0-153 (Refer to section 11.6.) 0 (No function)
f108
Always active function selection 2 0-153 (Refer to section 11.6.) 0 (No function)
f110 Always active function selection 3 0-153 (Refer to section 11.6.) 6 (ST)
+
Explanation of the coast stop function
When ST (Standby) is OFF, coast stops.
The default setting for ST (Standby) is ON. Please
change the following settings:



 (no function)

Assign open input terminal 6: ST (Standby).
Coast stops if terminal set for ST (Standby) is set to
OFF. The monitor on the inverter at this time displays

Motor
speed
ON
OFF
ON
OFF
F-CC
ST-CC
Coast stop
Note1) Input terminal function 8, 9 (Reset command and its inversion) cannot be assigned.