Toshiba Q9 Plus ASD, Installation & Operation Manual

Page: 400 / 434

E6581611
K-34
11
11.7 Output Terminal Function
It can be assigned the function No. in the following table to parameter
f130
to
f138
,
f157
,
f158
.

Table of output terminal functions 1
Function
No.
Code Function Action Reference
0 LL Frequency lower limit ON: Output frequency is more than 
OFF: Output frequency is  or less
5.4
1 LLN Inversion of frequency lower limit Inversion of LL 
2 UL Frequency upper limit ON: Output frequency is

or more
OFF: Output frequency is less than 
3 ULN Inversion of frequency upper limit Inversion of UL 
4 LOW Low-speed detection signal ON: Output frequency is  or more
OFF: Output frequency is less than

6.5.1
7.2.2
5 LOWN Inversion of low-speed detection signal Inversion of LOW
6 RCH Output frequency attainment signal
(acceleration/deceleration completed)
ON: Output frequency is within command frequency


OFF: Output frequency is more than command frequency 

6.5.2
7.2.2
7 RCHN Inversion of output frequency attainment
signal
(inversion of acceleration/deceleration
completed) Inversion of RCH
8 RCHF Set frequency attainment signal ON: Output frequency is within
 ± 
OFF: Output frequency is more than  ± 
6.5.3
9 RCHFN Inversion of set frequency attainment signal Inversion of RCHF 
10 FL Fault signal (trip output) ON: Inverter tripped
OFF: Inverter not tripped 7.2.2
11 FLN Inversion of fault signal (inversion of trip
output) Inversion of FL 
14 POC Over-current detection pre-alarm ON: Output current is  or more
OFF: Output current is less than

6.29.2
15 POCN Inversion of over-current detection pre-alarm Inversion of POC
16 POL Overload detection pre-alarm ON:  (%) or more of calculated value of overload
protection level
OFF: Less than

(%) of calculated value of overload
protection level
5.6
17 POLN Inversion of overload detection pre-alarm Inversion of POL
20 POH Overheat detection pre-alarm
ON: Approx. 95

C or more of IGBT element
OFF: Less than approx. 95

C of IGBT element (90

C or less
after detection is turned on)
7.2.2
21 POHN Inversion of overheat detection pre-alarm Inversion of POH
22 POP Overvoltage detection pre-alarm ON: Overvoltage limit in operation
OFF: Overvoltage detection canceled 6.19.5
23 POPN Inversion of overvoltage detection pre-alarm Inversion of POP
24 MOFF Power circuit undervoltage detection ON: Power circuit undervoltage (MOFF) detected
OFF: Undervoltage detection canceled 6.29.13
25 MOFFN Inversion of power circuit undervoltage
detection Inversion of MOFF
26 UC Small current detection ON: After output current comes to  or less, value of
less than

+

for

set time
OFF: Output current is more than 
(

+

or more after detection turns on)
6.29.7
27 UCN Inversion of small current detection Inversion of UC
28 OT Over-torque detection ON: After torque comes to

or more, value of more
than  -  for  set time
OFF: Torque is less than

(  -  or less after detection turns on)
6.29.10
29 OTN Inversion of over-torque detection Inversion of OT