Omron OMNUC W R88A-NCW152-DRT, Manual

Page: 24 / 292

2.3 Product Nomenclature
2-5
2
2.3 Product Nomenclature
The following diagram illustrates the nomenclature of the DeviceNet Unit.
Fig. 2.3 DeviceNet Unit
Rotary switches (
×
1,
×
10) :
Connector for Setup Tool (CN11) :
RS-232C connector for Setup Tool
Ground line:
Connect to the terminal marked "G" on the Servo Driver.
NCW152
Used to set the DeviceNet node address.
Rotary switch (DR) :
Used to set the baud rate for DeviceNet.
LED (MS) :
Module status LED indicator
LED (NS) :
DeviceNet network status LED indicator
Connector for DeviceNet communications (CN6):
For connection to any device that conforms
to DeviceNet specifications
Connector for I/O signals (CN4):
For connection to external I/O signals
and fully-closed encoder signal