Omron CP1L-EL20DR-D, Operation Manual

Page: 826 / 856

792
PLC Setup Appendix G
3 Use high speed counter 2 Do not use. Do not use. When power is turned
ON 95 12 to
15 0 hex
Use. 1 hex
3-1 Counting mode Linear mode Linear mode At start of operation 95 08 to
11 0 hex
Circular mode 1 hex
3-1-1 Circular
Max.
Count 0 0 At start of operation 97 and 96 00 to
15 0000
0000 hex
: :
4,294,967,295 FFFF
FFFF hex
3-2 Reset Z phase, soft-
ware reset Z phase, software reset When power is turned
ON 95 04 to
07 0 hex
Software reset 1 hex
Z phase, software reset
(comparing) 2 hex
Software reset
(comparing) 3 hex
3-3 Input Setting Differential
phase input Differential phase input When power is turned
ON 95 00 to
03 0 hex
Pulse + direction input 1 hex
Up/Down input 2 hex
Increment pulse input 3 hex
4 Use high speed counter 3 Do not use. Do not use. When power is turned
ON 98 12 to
15 0 hex
Use. 1 hex
4-1 Counting mode Linear mode Linear mode At start of operation 98 08 to
11 0 hex
Circular mode 1 hex
4-1-1 Circular
Max.
Count 0 0 At start of operation 100 and
99 00 to
15 0000
0000 hex
: :
4,294,967,295 FFFF
FFFF hex
4-2 Reset Z phase, soft-
ware reset Z phase, software reset When power is turned
ON 98 04 to
07 0 hex
Software reset 1 hex
Z phase, software reset
(comparing) 2 hex
Software reset
(comparing) 3 hex
4-3 Input Setting Differential
phase input Differential phase input When power is turned
ON 98 00 to
03 0 hex
Pulse + direction input 1 hex
Up/Down input 2 hex
Increment pulse input 3 hex
Name Default Settings When setting is read
by CPU Unit
Internal
address
Bits Settings