Omron CP1L-EL20DR-D, Operation Manual

Page: 807 / 856

773
Appendix G
PLC Setup
Startup Settings
Startup Hold Settings
Startup Data Read Setting
Mode: CPU Unit Operating Mode
Note A Programming Console cannot be connected to the CP1L-EL/EM. If the default setting, “Use program-
ming console,” is set, the CPU Unit will start in RUN mode.
Name Default Settings When setting is read
by CPU Unit
Internal
address
Bits Settings
1 Force Status Hold Bit Not held. Not held. When power is turned
ON 80 14 0
Held. 1
2 IOM Hold Bit Not held. Not held. When power is turned
ON 80 15 0
Held. 1
Name Default Settings When setting is read
by CPU Unit
Internal
address
Bits Settings
1 Read DM from flash
memory Do not read. Do not read. When power is turned
ON 82 15 0
Read. 1
Name Default Settings When setting is read
by CPU Unit
Internal
address
Bits Settings
1 Use programming con-
sole (RUN mode) Use program-
ming console
(RUN mode)
(See note.) Use programming con-
sole: RUN mode When power is turned
ON 81 00 to
15 0000 hex
Program: PROGRAM
mode 8000 hex
Monitor: MONITOR
mode 8001 hex
Run: RUN mode 8002 hex