Omron CP1L-EL20DR-D, Operation Manual

Page: 86 / 856

52
CPU Unit Operation Section 2-4
2-4-2 I/O Refreshing and Peripheral Servicing
I/O Refreshing
I/O refreshing involves cyclically transferring data with external devices using
preset words in memory. I/O refreshing includes the following:
• Refreshing between I/O words in the CIO Area and CPU Unit built-in I/O,
CP-series Expansion Units, and CP-series Expansion I/O Units.
All I/O refreshing is performed in the same cycle (i.e., time slicing is not used).
I/O refreshing is always performed after program execution.
Peripheral Servicing
Peripheral servicing involves servicing non-scheduled events for external
devices. This includes both events from external devices and service requests
to external devices.
Most peripheral servicing involves FINS commands. The specific amount of
time set in the system is allocated to each type of servicing and executed
every cycle. If all servicing cannot be completed within the allocated time, the
remaining servicing is performed the next cycle.
Note (1) Ethernet port, serial port, and communications port servicing is allocated
8% of the previous cycle time by default (the default can be changed) for
each service. If servicing is separated over many cycles, delaying com-
pletion of the servicing, set the same allocated time (same time for all ser-
vices) rather than a percentage under execute time settings in the PLC
Setup.
(2) An error will be occurred if the cycle time is too long. Modify the CX-Pro-
grammer’s response monitoring time longer according to the following
method.
Start the CX-Programmer. Select Change Model from the
PLC Menu.
The Change PLC Dialog Box will be displayed. Click the Settings Button
on the right side of Network Type . The Network Settings [USB] Dialog
Box will be displayed. Click the Network Tab and increase the value in
Response Timeout(s) .
Units Max. data exchange Data exchange area
CPU Unit built-in I/O 2 input words
2 output words I/O Bit Area
CP-series Expansion Units
and Expansion I/O Units Fixed depending on Units I/O Bit Area
Service Description
Ethernet port servicing • Non-scheduled servicing for communications
(either sending or receiving) via the Ethernet port.
Serial port servicing • Non-scheduled servicing for FINS or Host Link
commands received via a serial port from the CX-
Programmer, PTs, or host computers (e.g.,
requests for program transfers, monitoring, forced-
set/reset operations, or online editing)
• Non-scheduled servicing from the CPU Unit trans-
mitted from a serial port (non-solicited communica-
tions)
Communications port servic-
ing • Servicing to execute network communications or
serial communications for the SEND, RECV, CMND
instructions using communications ports 0 to 7
(internal logical ports)
• Servicing to execute background execution using
communications ports 0 to 7 (internal logical ports)
Built-in flash memory access
servicing • Read/write processing for built-in flash memory
Memory Cassette access ser-
vicing • Read/write processing for a Memory Cassette