Omron CP1L-EL20DR-D, Operation Manual

Page: 750 / 856

716
Auxiliary Area Allocations by Address Appendix D
A393 00 to 07 Serial Port 2
PT Communi-
cations Flags
(CP1L EM-
type CPU
Units) The corresponding bit will be ON
when the serial port 2 of a CP1L EM-
type CPU Unit is communicating with
a PT in NT Link or Serial PLC Link
mode.
Bits 0 to 7 correspond to units 0 to 7. ON: Commu-
nicating
OFF: Not
communicat-
ing Retained Cleared Refreshed
when there
is a nor-
mal
response
to the
token. ---
Serial Port 1
PT Communi-
cations Flags
(CP1L EL-
type CPU
Units) The corresponding bit will be ON
when the serial port 1 of a CP1L EL-
type CPU Unit is communicating with
a PT in NT Link or Serial PLC Link
mode.
Bits 0 to 7 correspond to units 0 to 7.
08 to 15 Serial Port 2
PT Priority
Registered
Flags (CP1L
EM-type CPU
Units) The corresponding bit will be ON for
the PT that has priority when the
serial port 2 of a CP1L EM-type CPU
Unit is communicating in NT link
mode.
Bits 0 to 7 correspond to units 0 to 7.
These flags are written when the pri-
ority registration command is
received. ON: Priority
registered
OFF: Priority
not registered Retained Cleared See
Function
column. ---
Serial Port 1
PT Priority
Registered
Flags (CP1L
EL-type CPU
Units) The corresponding bit will be ON for
the PT that has priority when the
serial port 1 of a CP1L EL-type CPU
Unit is communicating in NT link
mode.
Bits 0 to 7 correspond to units 0 to 7.
These flags are written when the pri-
ority registration command is
received.
00 to 15 Serial Port 2
Reception
Counter (No-
protocol
Mode) (CP1L
EM-type CPU
Units) Indicates (in binary) the number of
bytes of data received when the
serial port 2 of a CP1L EM-type CPU
Unit is in no-protocol mode. --- Retained Cleared Refreshed
when data
is received. ---
Serial Port 1
Reception
Counter (No-
protocol
Mode) (CP1L
EL-type CPU
Units) Indicates (in binary) the number of
bytes of data received when the
serial port 1 of a CP1L EL-type CPU
Unit is in no-protocol mode.
A394 00 to 07 Serial Port 1
PT Communi-
cations Flags
(CP1L EM-
type CPU
Units) The corresponding bit will be ON
when the serial port 1 of a CP1L EM-
type CPU Unit is communicating with
a PT in NT link mode.
Bits 0 to 7 correspond to units 0 to 7. ON: Commu-
nicating
OFF: Not
communicat-
ing Retained Cleared Refreshed
when there
is a nor-
mal
response
to the
token. ---
08 to 15 Serial Port 1
PT Priority
Registered
Flags (CP1L
EM-type CPU
Units) The corresponding bit will be ON for
the PT that has priority when the
serial port 1 of a CP1L EM-type CPU
Unit is communicating in NT link
mode.
Bits 0 to 7 correspond to units 0 to 7. ON: Priority
registered
OFF: Priority
not registered Retained Cleared See
Function
column. ---
00 to 15 Serial Port 1
Reception
Counter (No-
protocol
Mode) (CP1L
EL-type CPU
Units) Indicates (in binary) the number of
bytes of data received when serial
port 1 of a CP1L EL-type CPU Unit is
in no-protocol mode. --- Retained Cleared Refreshed
when data
is received. ---
A395 12 DIP Switch
Pin 3 Status
Flag The status of pin 3 on the DIP switch
on the front of the CPU Unit is written
to this flag every cycle. ON: Pin 3 ON
OFF: Pin 3
OFF Retained See
Func-
tion col-
umn. Written
every
cycle. ---
Address Name Function Settings Status
after
mode
change
Status
at star-
tup
Write
timing
Related
flags, set-
tings
Words Bits