Omron CP1L-EL20DR-D, Operation Manual

Page: 282 / 856

248
Pulse Outputs Section 7-2
Change tar-
get position Change the
target posi-
tion during
positioning
(multiple
start func-
tion) PLS2(887) can be
executed during
positioning to
change the target
position (number of
pulses).
Note When the tar-
get position
cannot be
changed
without main-
taining the
same speed
range, an
error will
occur and the
original oper-
ation will con-
tinue to the
original tar-
get position.
PULS(886)
↓
ACC(888)
(Indepen-
dent)
↓
PLS2(887)
• Number of
pulses
• Relative or
absolute
pulse spec-
ification
• Port
• “CW/CCW”
or “Pulse +
direction”
• Accelera-
tion rate
• Decelera-
tion rate
• Target fre-
quency
• Starting
frequency
PLS2(887)
↓
PLS2(887)
PLS2(887)
↓
PLS2(887)
Change tar-
get position
and speed
smoothly Change the
target posi-
tion and tar-
get speed
(frequency)
during posi-
tioning (mul-
tiple start
function) PLS2(887) can be
executed during
positioning to
change the target
position (number of
pulses), accelera-
tion rate, decelera-
tion rate, and target
frequency.
Note When the
settings can-
not be
changed
without main-
taining the
same speed
range, an
error will
occur and the
original oper-
ation will con-
tinue to the
original tar-
get position.
PULS(886)
↓
ACC(888)
(Indepen-
dent)
↓
PLS2(887)
• Number of
pulses
• Relative or
absolute
pulse spec-
ification
• Port
• “CW/CCW”
or “Pulse +
direction”
• Accelera-
tion rate
• Decelera-
tion rate
• Target fre-
quency
• Starting
frequency
Change the
acceleration
and deceler-
ation rates
during posi-
tioning (mul-
tiple start
function) PLS2(887) can be
executed during
positioning (accel-
eration or decelera-
tion) to change the
acceleration rate or
deceleration rate. PULS(886)
↓
ACC(888)
(Indepen-
dent)
↓
PLS2(887)
• Number of
pulses
• Accelera-
tion rate
• Decelera-
tion rate
PLS2(887)
↓
PLS2(887)
Operation Example
application
Frequency changes Description Procedure
Instruction Settings
Pulse
frequency
Target
frequency
Acceleration/
deceleration
rate
Specified
number of
pulses
Number of pulses
changed with
PLS2(887).
Execution of
PLS2(887)
PLS2(887) executed to
change the target position.
(The target frequency and
acceleration/deceleration
rates are not changed
Time
Pulse
frequency
Target frequency
Acceleration/
deceleration
rate
Number of
pulses specified
with PLS2(887).
Execution of
PLS2(887)
ACC(888) executed to change the
target frequency. (The target position is
not changed, but the acceleration/
deceleration rates are changed.)
Time
Number of pulses
not change with
PLS2(887).
Changed target
frequency
Pulse
frequency
New target
frequency
Original target
frequency
Acceleration rate n
Acceleration
rate 3
Acceleration
rate 2
Acceleration
rate 1
Number of pulses
specified by
PLS2(887) #N.
Execution of
PLS2(887) #1
Execution of
PLS2(887) #2
Execution of PLS2(887) #3
Execution of PLS2(887) #N
Time