698
Auxiliary Area Allocations by Address
Appendix D
A38
and
A39
All
Present Value
of Pulse Out-
put to Inverter
1, Relative
Value
These words contain the relative
value of the internal pulse output
when pulses are being output to the
error counter for inverter positioning
1.
Data range: 8000 0000 to 7FFF
FFFF hex (
−
2,147,483,648 to
2,147,483,647)
A38 contains the leftmost 4 digits
and A39 contains the rightmost 4
digits.
---
---
Cleared
Every error
counter 1
cycle
---
A40 to
A44
All
Ethernet Com-
munication
Error Informa-
tion
When an error has occurred, the
error code, error contents, and
error’s time and date are stored in
these AR channels. The most recent
error can be stored.The function of
these 5 words is as follows:
1) Error code (bits 0 to 15)
2) Error contents (bits 0 to 15)
3) Minutes (bits 8 to 15),
Seconds (bits 0 to 7)
4) Day of month (bits 8 to 15),
Hours (bits 0 to 7)
5) Year (bits 8 to 15), Month (bits 0 to
7)
The detail of
error code
and contents,
please refer
to 12-2-6.
Seconds:
00 to 59, BCD
Minutes:
00 to 59, BCD
Hours:
00 to 23, BCD
Day of month:
01 to 31, BCD
Month:
01 to 12, BCD
Year:
00 to 99, BCD
Retained
Retained Refreshed
when error
occurs.
A46.15
A500.11
A45
14
Link Status
Flag
ON while a link is established
between hubs.
ON: Estab-
lished
OFF: Termi-
nated
---
Cleared
Refreshed
when link
state
changes.
---
A46
02
IP Address
Setting Error
Flag
ON if any of the following conditions
apply to the IP address.
• All bits in the host ID are 0 or 1.
• All bits in the network ID are 0 or 1.
• All bits in the subnet ID are 1.
• The IP address begins with 127
(0x7F)
ON: Error
OFF: No error
---
Cleared
Refreshed
when error
occurs.
---
03
IP Address
Table Error
Flag
ON if the IP address table informa-
tion is incorrect.
ON: Incorrect
OFF: Correct
---
Cleared
Refreshed
when error
occurs.
---
04
IP Router
Table Error
Flag
ON if the IP router table information
is incorrect.
ON: Incorrect
OFF: Correct
---
Cleared
Refreshed
when error
occurs.
---
05
DNS Server
Error Flag
ON when the following errors occur
during DNS server operation:
• An illegal server IP address is set.
• A timeout occurs during communi-
cations with the server.
ON: Error
OFF: No error
---
Cleared
Refreshed
when error
occurs.
---
06
Routing Table
Error Flag
ON if the routing table information is
incorrect.
ON: Incorrect
OFF: Correct
---
Cleared
Refreshed
when error
occurs.
---
11
SNTP Server
Error Flag
ON when the following errors occur
during SNTP server operation:
• An illegal server IP address or host
name is set.
• A timeout occurs during communi-
cations with the server.
ON: Error
OFF: No error
---
Cleared
Refreshed
when error
occurs.
---
14
Address Dis-
agreement
Flag
ON if the remote IP address is set to
automatic generation but the local IP
address host number and FINS node
address do not agree.
ON: Dis-
agreement
OFF: Agree-
ment
---
Cleared
Refreshed
when error
occurs.
---
15
Ethernet Com-
munication
Error Flag
ON while an Ethernet communica-
tion error occurs.
ON: Error
OFF: No error
---
Cleared
Refreshed-
when
Ethernet
communi-
cation error
occurs.
A40 to
A44
A500.11
Address
Name
Function
Settings
Status
after
mode
change
Status
at star-
tup
Write
timing
Related
flags, set-
tings
Words
Bits
Summary of Contents for CP1L-EL20DR-D
