Omron CP1L-EL20DR-D, Operation Manual

Page: 584 / 856

550
CompoBus/S I/O Link Units Section 9-6
(3) LED Indicators
Used to show the CompoBus/S communications status.
(4) Expansion I/O Connecting Cable
Connected to the expansion connector of a CP1L-EL/EM CPU Unit or a
Expansion Unit or Expansion I/O Unit. The cable is provided with the
CompoBus/S I/O Link Unit and cannot be removed.
Note Do not touch the cables during operation. Static electricity may
cause operating errors.
(5) Expansion Connector
Used to connect Expansion Units or Expansion I/O Units.
Operating Procedure
Connecting the
CompoBus/S I/O Link Unit CompoBus/S I/O Link Units are connected to the CP1L-EL/EM CPU Unit. For
CP1L EM-type CPU Units, up to three Units can be connected, including any
other Expansion Units and Expansion I/O Units. The Units can be connected
in any order from the CPU Unit. For CP1L EL-type CPU Units, one Unit can
be connected.
Indicator Name Color Meaning
COMM Communications
indicator Yellow ON: Communications in progress.
OFF: Communications stopped or error
has occurred.
ERR Error indicator Red ON: A communications error has
occurred.
OFF: Indicates normal communications
or stand-by.
Connect the Unit.
Determine the node
address of the
CompoBus/S I/O Link Unit
and set the DIP switch.
Wire the CompoBus/S
transmission path.
•
Connect the CompoBus/S I/O Link Unit.
•
The node number should be a unique number between
0 and 15.
•
Use the DIP switch to set the CompoBus/S I/O Link
Unit fs node number, communications mode, and the
status of output data when a communications error
occurs.
•
Connect the CompoBus/S I/O Link Unit to a
CompoBus/S transmission path.
BD L NC( BS-) N C
BD H NC( BS+)
S
COMM
ERR
ON
1 2 3 4 5 6
No.
SRT21
EXP
MAC Address:
01234567890A
00 NC 02 04 06 08 10 00 02 04 06 08 10
01 COM 03 05 07 09 11 01 03 05 07 09 11
BKUP
ERR/ALM
LNK/ACT
SYSMAC
CP1L
POWER
RUN
INH
1
00 01 02 03 04 06 00 01 03 04 06
COM 02 COM 05 07 COM COM(V+) 05 07 ANALOG INPUT
V1+ V2+ COM
2
CP1L-EL/EM CPU Unit
CompoBus/S I/O Link Unit