Mindray TE5, Operator'S Manual

Page: 319 / 323

List of Vocal Commands H-1
Appendix H List of Vocal
Commands
The ultrasound system can automatically recognize some vocal commands. You can use a microphone
device to input the vocal commands as shown in the following figure. For details about inputting the
vocal commands, please refer to "3.11.3 iVocal". After the input command is recognized, the system
automatically performs the corresponding operations.
Vocal command Operation
Hello Mindray
Turn on audio control
Turn Off
Turn off audio control
B mode
Enter the corresponding imaging mode
CDI mode
PW mode
CW mode
M mode
Power mode
3D
Freeze
Freeze the image
Unfreeze
Unfreeze the image
Gain Increase/Decrease
Increase/decrease the gain of the image
(applicable to all imaging modes)
Gain Auto Increase/Decrease
Continuously increase/decrease the gain
Gain Stop
Stop the gain of the image (applicable to
all imaging modes)
Angle More/Less
Increase/decrease the rotation angle of
the image
Dual Enter the Dual split mode
Full image Display the image in full screen mode
iTouch
Perform the iTouch function to optimize
the image. For details, please refer to "5
Image Optimization "
Update Start or stop image acquisition
Clear
Clear the comments or body markers
Left/Right Steer
Steer the image to the left/Right. For
details, see "5
Image Optimization
"
BaseLine Up/Down
Move the baseline upward/downward
Depth Increase/Decrease
Increase/decrease the image scanning
depth
Middle Line
Display the middle line. For details, refer to
“13.3
Middle Line
”
Zoom out/in Zoom out/in the image
Qsave Enter the Quick Save menu
Open Patient Info Dialog Open Patient Info Dialog
Close Patient Info Dialog Close Patient Info Dialog
Open Preset Dialog Open Preset Dialog