Mindray TE5 Operator'S Manual Download Page 269

Page: 269 / 323

System Maintenance 17-5



Compatible Disinfectants

The following table lists compatible disinfectants.

Manufacturer

Product Name

Type

Advanced Ultrasound Solutions Inc.

SONO

ULTRASOUND WIPES

Wipe

Parker laboratories Inc

Protex

Disinfectant Spray

Spray

PDI Inc.

Sani-Cloth® Plus germicidal

disposable cloth

Wipe

Bode Chemie Gmbh

Mikrobac Tissues

Wipe

GAMA Healthcare Ltd.

Clinell universal wipes

Wipe

PDI Inc.

Sani-Cloth® AF3

Wipe

Diversey

VIREX II 256

Solution

Diversey

VIREX TB

Solution

Schulke

Schulke mikrozid

Sensitive

Wipes

Wipe

0.5% sodium hypochlorite

Solution

75% alcohol

Solution



Disinfection Procedures

NOTE:

Clean the system in power off status; or in power on status, tap

in the top-right

corner of the screen and select

to lock the system for 10 seconds.

The ultrasound system has passed puncture test and leakage current test, and thus
can be disinfected on power-on status.

After cleaning, disinfect the main unit as follows.

Wear medical gloves to prevent infection.

Disinfect the main unit with disinfectant wipe, spray or solution. Follow the disinfectant
manufacturer’s recommended contact time and method.

NOTE: Do not disinfect handle, or any visible sockets or interfaces (such as probe sockets,
ventilation holes, dust-proof cover, loudspeaker, sockets or interfaces in the IO panel and
power supply panel). See the following figure.

Summary of Contents for TE5




































































































































































































































































































































Search results

Summary of Contents for TE5

Reviews:

Related manuals for TE5

Brands by name

Popular brands

Mindray TE5, Operator'S Manual

Search results

Summary of Contents for TE5

Reviews:

Related manuals for TE5

Brands by name

Popular brands