Mindray TE5 Operator'S Manual Download Page 199

Page: 199 / 323

Setup 12-25

12.3.2 Network Preset

12.3.2.1 iStorage Preset



The iStorage screen is as follows:

Name

Description

Service Name

The name of the iStorage service.

IP Address

IP address of the iStorage service device.

Port

Port for transmitting.

Connect

Tap to verify connection.

Clear

Clear the information that is being typed in. (service not added yet)

Add

Tap to add the Network service to the service list.

Update

To save the changed parameters.

Delete

Tap to delete the selected service from the service list.

Default

To set the server as the default one.



Add an iStorage service

1. Set the iStorage server properties as described above.

Summary of Contents for TE5




































































































































































































































































































































Search results

Summary of Contents for TE5

Reviews:

Related manuals for TE5

Brands by name

Popular brands

Mindray TE5, Operator'S Manual

Search results

Summary of Contents for TE5

Reviews:

Related manuals for TE5

Brands by name

Popular brands