Mindray TE5, Operator'S Manual

Page: 55 / 323

Exam Preparation 4-1
4
Exam Preparation
A patient exam can be started under the following situations:
 New patient information: to start a new patient exam, patient information must first be entered.
 New exam: to start a new exam for patient who is already registered, the recorded information
can be obtained through either iStation or Worklist. See chapter “4.1.2 Retrieve Patient
Information” for details.
 Activate exam: to select an exam that has been completed within 24 hours, continue the exam
with imported patient information and exam data.
General procedure for an exam:
Enter the patient information –> select an exam mode and probe –> Choose an imaging mode ->
Start the exam.
Tips: The system supports image scanning and measurement without patient information.
4.1 Patient Information
To start a new patient exam, it is best to enter detailed patient information. The system will set up a
unique information database for each patient based on the patient information entered, so that the
information of one patient will not be confused with that of another patient.
CAUTION:
Before examining a new patient, tap [End] in the bottom-left
corner of the operating panel to end the exam of the previous
patient. Update the patient ID and information to avoid mixing
data between patients.
 To enter the Patient Info screen

Tap [Patient] on the left side of the operating panel.
 To exit the Patient Info screen

Tap [Done] on the Patient Info screen.
 Tap [Cancel] on the Patient Info screen to exit the screen without saving any of the entered
patient data.