Mindray TE5, Operator'S Manual

Page: 315 / 323

iWorks (Auto Workflow Protocol) G-3
G.4.3 Repeat View
If necessary, tap [Repeat] to insert another template of the current view. You can then perform
an extra examination.
G.4.4 View Replacement
The previous image will be deleted and replaced by the new image.
G.4.5 Delete View
Tap the view name to select the view to be deleted. Tap [Delete] to delete the selected view.
G.5 Manual Examination
The user can run the system manually. This is used when an unusual or atypical workflow is
required.
You can run the system manually if necessary.
 Start manual examination: tap [Suspend] to pause the current iWorks protocol. The
system enters manual examination status.
 Return to iWorks: tap [iWorks] to return to automated status. You can continue the
previous iWorks scan.
G.6 Insert
Insert is a specialized protocol event within iWorks and iWorks OB. It assists with the
workflow for documenting and measuring common pathological (disease) states (i.e. Mass,
Cyst, Stenosis, Thrombus) that occurs outside a routine, normal examination.
1. Tap [Insert] to enter the status.
2. Select the necessary protocol and the system adds the protocol events to the current
protocol.
3. Perform measurements or add comments/body marks to the image if necessary.
G.7 iWorks Settings
Enter the iWorks preset screen using the path: “[Setup]

[iWorks].” Here you can customize
the protocols and views: