Mindray TE5, Operator'S Manual

Page: 19 / 323

Safety Precautions 1-7
3. To avoid damaging the system, DO NOT use it in following environment:
(1) Locations exposed to direct sunlight.
(2) Locations subject to sudden changes in environmental temperature.
(3) Dusty locations.
(4) Locations subject to vibration.
(5) Locations near heat generators.
(6) Locations with high humidity.
4. Turn ON the system only after the power has been turned OFF for a while. If the
system is turned ON immediately after being turned OFF, the system may not be
rebooted properly and could malfunction.
5. When using or placing the system, keep the system horizontal to avoid
imbalance.
6. Remove ultrasound gel from the face of a probe when the examination is
complete. Water in the gel may enter the acoustic lens and adversely affect the
performance and safety of the probe.
7. You should properly back up the system to a secure external storage media,
including system configuration, settings and patient data. Data stored to the
system’s hard drive may be lost due to system failure, improper operation or
accident.
8. Do not apply external force to the touch screen; otherwise, the system may be
damaged.
9. If the system is used in a small room, the room temperature may rise. Please
provide proper ventilation and free air exchange.
10. To dispose of the system or any part, contact Mindray Customer Service
Department or sales representative. Mindray is not responsible for any system
content or accessories that have been discarded improperly.
11. Electrical and mechanical performance may be degraded due to long period of
usage (such as current leakage or distortion and abrasion); the image sensitivity
and precision may become worse too. To ensure optimal system operations, it is
recommended that you maintain the system under a Mindray service
agreement.
12. Ensure that the current exam date and time are the same as the system date
and time.
13. DO NOT turn OFF the power supply of the system during printing, file storage or
invoking other system operations. An interrupted process may not be completed,
and can become lost or corrupted.
14. Use detachable power supply cord as mains power breaking device. DO NOT
set equipment in a place where it is difficult to disconnect the detachable power
supply cord
！