Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 84 / 1488

neighbor graceful-restart stalepaths-time
Syntax
neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart
stalepaths-time seconds
no neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart
stalepaths-time [ seconds ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.
Description
For a peer or peer group, sets the time period after a peer session restart during
which BGP waits for an End-of-RIB marker from the peer before flushing all stale
routes from that peer. The period is measured from when the session is detected in
a down state. The
no version restores the default value, 360 seconds.
Options
■
ipAddress —IP address of BGP neighbor
■
ipv6Address —IPv6 address of BGP neighbor
■
peerGroupName —Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
■
seconds —Integer in the range 1–3600; default value is 360 seconds
Mode
Address Family Configuration, Router Configuration
42 ■
neighbor graceful-restart stalepaths-time
JUNOSe 11.1.x Command Reference Guide N to Z