Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1447 / 1488

vlan auto-configure
Syntax
vlan auto-configure upperInterfaceType [ lockout-time { minTime maxTime |
none } ]
no vlan auto-configure upperInterfaceType [ lockout-time ]
Release Information
Command introduced in JUNOSe Release 7.1.0.
lockout-time keyword added in JUNOSe Release 7.3.0.
Description
Specifies the types of dynamic upper interface encapsulations that are accepted or
detected by a dynamic VLAN subinterface. You can issue this command repeatedly
in Profile Configuration mode to include autodetection of multiple upper interface
encapsulation types within the base profile for a dynamic VLAN subinterface. The
no version terminates detection of the specified encapsulation type.
Options
upperInterfaceType —One of the following dynamic encapsulation types:
■
■
ip
■
pppoe
■
minTime —Minimum lockout time in the range 1–86400 seconds (24 hours);
default value is 1 second
■
maxTime —Maximum lockout time in the range 1–86400 seconds (24 hours);
default value is 1 second
■
none—Disables lockout time for the specified dynamic encapsulation type
Mode
Profile Configuration
vlan auto-configure
■ 1405
Chapter 9: U, V, W, and Y Commands