Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1414 / 1488

tunnel source
Syntax
For DVMRP and GRE tunnels in Interface Configuration mode:
tunnel source { ipAddress | interfaceType interfaceSpecifier }
no tunnel source
For IPSec tunnels in Interface Configuration mode:
tunnel source { ipAddress | identity fqdn }
no tunnel source
For DVMRP and GRE tunnels in IP PIM Data MDT Configuration mode and in IP
Tunnel Destination Profile Configuration mode:
[ no ] tunnel source ipAddress
Release Information
Command introduced before JUNOSe Release 7.1.0.
IP PIM Data MDT Profile Configuration mode, and IP Tunnel Destination Profile
Configuration mode added in JUNOSe Release 8.2.0.
Description
In Interface Configuration mode, configures the source for a DVMRP, GRE, or IPSec
tunnel. The
no version deletes the tunnel source.
In IP Tunnel Destination Profile Configuration mode, configures the source in the
destination profile for dynamic IP tunnels. The
no version deletes the tunnel source.
In IP PIM Data MDT Configuration mode, configures the source in the IP PIM Data
MT profile for multicast VPNs. The
no version deletes the tunnel source.
Options
■
ipAddress —IP address of an existing interface that will serve as the tunnel’s
source
■
interfaceType —Interface type; see Interface Types and Specifiers on page 5
■
interfaceSpecifier —Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
■
fqdn —Fully qualified domain name of the interface to serve as the tunnel’s source;
a maximum of 80 characters
Mode
Interface Configuration, IP PIM Data MDT Configuration, IP Tunnel Destination Profile
Configuration
1372 ■
tunnel source
JUNOSe 11.1.x Command Reference Guide N to Z