Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 113 / 1488

net
Syntax
[ no ] net networkEntityTitle
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Configures an IS-IS network entity title for the specified routing process. The no
version removes a specific NET. You must specify a NET. You can add multiple
manual area IDs by adding multiple NETs with the same system ID. The last NET
cannot be removed.
Options
networkEntityTitle —NET that specifies the area ID and the system ID for an IS-IS
routing process; can be either an address or a name; in the form of:
areaID.systemID.nSelector
For example:
■
■
areaID —All bytes in front of the system ID; the number of bytes can vary
from 1–13 bytes
■
systemID —Always 6 bytes and cannot vary
■
nSelector —Last byte; always 0
Mode
Router Configuration
net
■ 71
Chapter 2: N Commands