Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1229 / 1488

snmp-server group
Syntax
snmp-server group groupName securityModel authenticationLevel [ read readView ]
[ write writeView ] [ notify notifyView ] [ storageType ]
no snmp-server group groupName securityModel authenticationLevel
Release Information
Command introduced in JUNOSe Release 7.1.0.
Description
Dynamically configures an SNMP server group. The no version removes the
dynamically created group.
NOTE: You must access the CLI at privilege level 15 to view or use this command.
Options
■
groupName —Name of the SNMPv3 group
■
securityModel —Security model
■
v1—SNMPv1
■
v2c—SNMPv2c
■
usm—SNMPv3
■
authenticationLevel —Method for authentication and privacy
■
none—No authentication and no privacy
■
auth—Authentication only
■
priv—Authentication and privacy
■
readView —Name of the view for read access; the default is no access
■
writeView —Name of the view for write access; the default is no access
■
notifyView —Name of the view for notification; the default is no access
■
storageType —Storage type
■
volatile—Loses contents on warm or cold start
■
nonvolatile—Preserves contents across warm or cold start. This is the default.
Mode
Global Configuration
snmp-server group
■ 1187
Chapter 7: S Commands