Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1444 / 1488

virtual-router
Syntax
virtual-router vrName | : vrfName | vrName : vrfName
no virtual-router vrName [ wait-for-completion [ waitSeconds ] ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Creates a virtual router or accesses the context of a previously created virtual router
or a VRF. The
no version deletes the virtual router, and the router defaults to the
default virtual router. Issuing a no version that specifies an existing VRF only displays
the error message: “ Cannot delete a VRF with this command.” You must use the no
ip vrf command to remove a VRF.
NOTE: In Domain Map Configuration mode, the virtual-router command has been
replaced by the router-name command and may be removed completely from Domain
Map Configuration mode in a future release.
Options
■
vrName —Name of the virtual router; a string of 1–32 alphanumeric characters
■
: vrfName —Name of a VRF in the current VR context; a string of 1–32
alphanumeric characters
■
vrName : vrfName —Name of a VRF in the context of a VR other than the current
VR
■
wait-for-completion—Specifies (in the absence of waitSeconds ) that the CLI waits
for completion of the no version operation before it returns a prompt, regardless
of how long that takes
■
waitSeconds —Number of seconds, in the range 1–64000, that the CLI waits
before it returns a prompt, regardless of whether the no version operation has
been completed
Mode
Global Configuration, Privileged Exec
1402 ■
virtual-router
JUNOSe 11.1.x Command Reference Guide N to Z