Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 254 / 1488

ppp authentication
Syntax
ppp authentication [ virtual-router vrName ] { authProtocol }
no ppp authentication
Release Information
Command introduced before JUNOSe Release 7.1.0.
eap keyword added in JUNOSe Release 7.3.0.
Description
Requests authentication from a PPP peer router. The no version removes the
authentication requirement.
Options
vrName —Name of a virtual router to be used as the authentication virtual router
■
■
authProtocol —One or more of the following protocols, in order of preference; if
the peer router refuses to negotiate the first choice, then the local router requests
the next specified protocol, and so on; if the peer router refuses to negotiate
authentication, the local router terminates the session
■
eap—Specifies EAP authentication protocol
■
chap—Specifies CHAP authentication protocol
■
pap—Specifies PAP authentication protocol
Mode
Interface Configuration, Profile Configuration, Subinterface Configuration
212 ■
ppp authentication
JUNOSe 11.1.x Command Reference Guide N to Z