Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 757 / 1488

show ip bgp community
Syntax
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName |
l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName | route-target signaling ]
community { communityNumber | local-as | no-advertise | no-export }
[ communityNumber | local-as | no-advertise | no-export ]*
[ exact-match ] [ fields fieldOptions ] [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
l2vpn and all keywords added in JUNOSe Release 7.1.0.
vpls keyword and vplsName variable added in JUNOSe Release 7.1.0.
vpws keyword and vpwsName variable added in JUNOSe Release 8.1.0.
route-target signaling keywords added in JUNOSe Release 8.2.0.
Description
Displays routes that belong to the specified BGP community.
Options
■
ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the
default option
■
ipv4 multicast—Specifies the IPv4 multicast address family and routing table
■
vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
■
vpvn4 vrf vrfName —Specifies the IPv4 VPN address family and only the IPv4
VPN routing and forwarding instance with the name vrfName
■
l2vpn all—Specifies all VPLS and VPWS instances in the L2VPN address family
■
l2vpn vpls vplsName —Specifies the VPLS instance with the name vplsName
■
l2vpn vpws vpwsName —Specifies the VPWS instance with the name vpwsName
■
route-target signaling—Specifies the route-target address family
■
communityNumber —Filters routes according to this community number, specified
either as a number in the range 1–4294967295 or in AA : NN format (autonomous
system number:community number); displays only routes that are members of
the specified community
■
local-as—Displays only routes belonging to the local-AS community
■
no-advertise—Displays only routes belonging to the no-advertise community
■
no-export—Displays only routes belonging to the no-export community
■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
■
exact-match—Displays only routes that have exactly the specified communities
■
fields—Displays only the specified fields; the display order of the fields is
hard-coded and not affected by the order in which you enter them
■
fieldOptions —Fields to be displayed, in the format
all | [ afi | aggregator | as-path | atomic-aggregate | best | clusters | communities
| extended-communities | imported | intro | in-label | loc-pref | med | next-hop
show ip bgp community
■ 715
Chapter 7: S Commands