Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1336 / 1488

test bgp ipv6 neighbor
Syntax
test bgp ipv6
[ unicast | multicast | vpnv6 all | vpnv6 vrf
vrfName | route-target signaling ]
neighbor { ipAddress | ipv6Address | peerGroupName }
{ advertised-routes | routes } [ ipv6Prefix ]
[ distribute-list accessListName |
filter-list asPathAccessListName [ weight weightValue ] |
prefix-list prefixListName | prefix-tree prefixTreeName | route-map mapTag ]*
[ fields { fieldOptions } ] [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
route-target signaling keywords added in JUNOSe Release 8.2.0.
Description
Tests BGP policy for IPv6 BGP routes advertised to or received from peers without
implementing the policy. There is no
no version.
Options
■
unicast—Specifies the IPv6 unicast address family and routing table; the default
option
■
multicast—Specifies the IPv6 multicast address family and routing table
■
vpnv6 all—Specifies the VPN-IPv6 address family and all IPv6 VPN routing and
forwarding instances
■
vpn6 vrf vrfName —Specifies the VPN-IPv6 address family and only the IPv6 VPN
routing and forwarding instance with the name vrfName
■
route-target signaling—Specifies the route-target address family
■
ipAddress —IP address of BGP neighbor
■
ipv6Address —IPv6 address of BGP neighbor
■
peerGroupName —Name of a BGP peer group
■
advertised-routes—Tests only the outgoing advertisements to the specified BGP
neighbor or peer group
■
routes—Tests only the incoming routes originating from the specified BGP
neighbor or peer group
■
ipv6Prefix —IPv6 prefix for which you want information displayed
■
accessListName —Name of the access list to use as the distribute list to filter routes
by prefix; string of up to 32 alphanumeric characters
■
asPathAccessListName —Name of a single AS path access list used to filter routes
by AS path; string of up to 32 characters
■
weightValue —Weight assigned to incoming routes matched by the AS path access
list; integer in the range 0–4294967295
■
prefixListName —Name of a BGP prefix list used to filter routes by prefix
■
prefixTreeName —Name of a BGP prefix tree used to filter routes by prefix
■
mapTag —Name of a route map; string of up to 32 alphanumeric characters
1294 ■
test bgp ipv6 neighbor
JUNOSe 11.1.x Command Reference Guide N to Z