Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 177 / 1488

path ds1|e1 channel-group description
Syntax
path pathChannel { ds1 | e1 } tributaryIdentifier
channel-group channelGroupNumber description name
no path pathChannel { ds1 | e1 } tributaryIdentifier
channel-group channelGroupNumber description
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Assigns a text description or an alias to a DS1 (T1) or an E1 channel group for
channelized SONET and SDH interfaces. Use the
show controllers sonet command
to display the text description. The no version removes the description or alias.
Options
■
pathChannel —Number, in the range 1–2147483648, that identifies the path
■
tributaryIdentifier —Specifier for the tributary in the format
pathChannel { ds1 | e1 } pathPayload / tributaryGroup / tributaryNumber
■
pathPayload —Payload number for the path; value is 1 for SONET and in the
range 1–3 for SDH
■
tributaryGroup —Number, in the range 1–7, that identifies the group within
the path
■
tributaryNumber —Number of the tributary within the tributary group; the
value is in the range 1–4 if the tributary type is vt15 or tu11 and in the range
1–3 if the tributary type is tu12
■
channelGroupNumber —Either a fractional T1 interface in the range 1–24 or a
fractional E1 interface in the range 1–31
■
name —Text string or alias of up to 80 characters for the DS1 or E1 channel group
for channelized SONET and SDH interfaces
Mode
Controller Configuration
path ds1|e1 channel-group description
■ 135
Chapter 4: P Commands