Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 514 / 1488

set community
Syntax
set community { list communityListName [ additive ] | none }
set community { communityNumber | knownCommunity | asCommunNumber }
[ communityNumber | knownCommunity | asCommunNumber ] * [ additive ]
no set community
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Sets the BGP community attribute to one or more community numbers or a list of
community numbers. The
no version removes the set clause from a route map.
Options
■
communityListName —Name of a community; a string of up to 32 characters
■
additive—Adds the community number to the community list
■
none—Removes the community attribute
■
communityNumber —Number, in the range 1– 4294967295, that specifies the
community number
■
knownCommunity —Any of the following well-known communities; the Internet
community is not an option:
■
local-as—Prevents advertisement outside of the local AS
■
no-advertise—Prevents advertisement to any peer
■
no export—Prevents advertisement beyond the BGP confederation boundary
■
asCommunNumber —AS community number in the format AA:NN :
■
AA —Number, in the range 1–65535, that identifies an AS
■
NN —Number, in the range 1–65535, that uniquely identifies a community
within an AS
■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Mode
Route Map Configuration
472 ■
set community
JUNOSe 11.1.x Command Reference Guide N to Z