Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 270 / 1488

ppp max-negotiations
Syntax
ppp max-negotiations [ lcp | ipcp | ipv6cp ] [ maxNegotiationsCount ]
no ppp max-negotiations [ lcp | ipcp | ipv6cp ]
Release Information
Command introduced in JUNOSe Release 10.0.0.
Description
Configures the maximum number of LCP, IPCP, or IPv6CP renegotiation attempts
the router accepts before terminating a PPP session. If you do not specify the optional
lcp , ipcp , or ipv6cp keyword, the command sets the maximum number of
renegotiation attempts for each of LCP, IPCP, and IPv6CP to the value you specify,
or to the default value (30) if you omit the optional
maxNegotiationsCount value.
When a PPP client exceeds the configured maximum number of renegotiation
attempts, the router sends a termination request to end the PPP session. The
no
version restores the default value, 30 renegotiation attempts.
Options
■
lcp—Sets the maximum number of renegotiation attempts for the Link Control
Protocol (LCP)
■
ipcp—Sets the maximum number of renegotiation attempts for the Internet
Protocol Control Protocol (IPCP)
■
ipv6cp—Sets the maximum number of renegotiation attempts for the Internet
Protocol version 6 Control Protocol (IPv6CP)
■
maxNegotiationsCount —Maximum number of renegotiation attempts the router
accepts before terminating a PPP session, in the range 1–65535; default value
is 30
Mode
Interface Configuration, Profile Configuration, Subinterface Configuration
228 ■
ppp max-negotiations
JUNOSe 11.1.x Command Reference Guide N to Z