Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 556 / 1488

■
simple—Specifies the simple form of shared shaping, which does not manage
voice and video traffic, but shapes data queue rates to the value of the shared
rate minus the combined voice and video traffic rate
■
auto—Specifies that the router automatically selects the type of shared shaping
depending on the module; compound is selected only for line modules that
support it, and simple is selected for all other line modules; this is the default
mode
■
compound—Specifies the compound form of shared shaping, which actively
shapes voice and video traffic so that the shared rate cannot be exceeded, and
shapes data queue rates to the value of the shared rate minus the combined
voice and video traffic rate; requires special hardware
■
explicit-constituents—Overrides automatic selection of compound shared-shaping
constituents and enables you to explicitly specify constituents and bandwidth
allocation; generates an error message and has no effect when applied to modules
that do not support compound shared shaping
Mode
Scheduler Profile Configuration
Related Topics
■
Configuring Simple Shared Shaping
■
Configuring Implicit Constituents for Simple or Compound Shared Shaping
■
Configuring Explicit Constituents for Simple or Compound Shared Shaping
■
Configuring a Basic Parameter Definition for QoS Administrators
514 ■
shared-shaping-rate
JUNOSe 11.1.x Command Reference Guide N to Z