Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1339 / 1488

test ip bgp neighbor
Syntax
test ip bgp
[ ipv4 unicast | ipv4 multicast | vpnv6 all | vpnv6 vrf
vrfName |
route-target signaling ] neighbor { ipAddress | ipv6Address | peerGroupName } {
advertised-routes |
routes } [
routeAddr [ routeMask [ route-rd distinguisher ] ] ]
[ distribute-list accessListName |
filter-list asPathAccessListName [ weight weightValue ] |
prefix-list prefixListName | prefix-tree prefixTreeName | route-map mapTag ]*
[ fields { fieldOptions } ] [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
route-target signaling keywords added in JUNOSe Release 8.2.0.
Description
Tests BGP policy for routes advertised to or received from peers without implementing
the policy. There is no
no version.
Options
■
ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the
default option
■
ipv4 multicast—Specifies the IPv4 multicast address family and routing table
■
vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
■
vpvn4 vrf vrfName —Specifies the IPv4 VPN address family and only the IPv4
VPN routing and forwarding instance with the name vrfName
■
route-target signaling—Specifies the route-target address family
■
ipAddress —IP address of BGP neighbor
■
ipv6Address —IPv6 address of BGP neighbor
■
peerGroupName —Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
■
advertised-routes—Tests only outgoing advertisements to the specified neighbor
■
routes—Tests only the incoming advertisements from the specified neighbor
■
routeAddr —Prefix advertised by BGP
■
routeMask —Subnet mask associated with prefix; if not specified, a best match
on routeAddr is performed
■
distinguisher —Unique two-part identifier of the format number1 : number2 where:
■
number1 —AS number or an IP address
■
number2 —Unique integer; 32 bits if number1 is an AS number; 16 bits if
number1 is an IP address
test ip bgp neighbor
■ 1297
Chapter 8: T Commands