Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 105 / 1488

neighbor send-label
Syntax
[ no ] neighbor { ipAddress | ipv6Address | peerGroupName } send-label
Release Information
Command introduced before JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.
Description
Configures a neighbor to distribute an MPLS label with its IPv4 and IPv6 route
advertisements. This command enables BGP to dynamically negotiate SAFI 1 and
SAFI 4 with this neighbor. In Router Configuration mode, the command has the same
effect as if it were issued in the context of the IPv4 unicast address family. The
no
version removes the configuration.
Options
ipAddress —IP address of BGP neighbor
■
■
ipv6Address —IPv6 address of BGP neighbor
■
peerGroupName —Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command. You cannot override the
characteristic for a specific member of the peer group.
Mode
Address Family Configuration, Router Configuration
neighbor send-label
■ 63
Chapter 2: N Commands